Illustrative render
Controllers
G-Code 3/4-Axis CNC Motion Controller, Multi-Axis Control System with Arc and Line Interpolation and Teach Programming
$15.60¥104 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this 3-axis 4-axis G-code CNC controller listing says
A motion controller sold as a G-code CNC control system is what this listing offers, for three or four axes, with linked multi-axis movement, arc and line interpolation and teach programming. Teach programming usually means jogging the machine to a point and storing it as a program step, which suits simple repeat jobs. At US$15.60 (CNY 103.99) observed, it sits well below the other controller listings we carry, which run from about US$23 to US$85. The title does not say whether it has a screen or runs from a PC, how G-code reaches it, its pulse rate or I/O count, or which axis version the price covers.
| Type | CNC motion control system |
|---|---|
| Axes | 3 or 4 axes |
| Programming | G-code, teach programming |
| Motion | Multi-axis linkage, arc and line interpolation |
What we confirm with the machine seller first
- Does the observed price of US$15.60 buy the 3-axis or the 4-axis version, and what does the other version cost?
- How does a G-code file get into the controller, by USB stick, SD card, serial or PC link, and does it have a screen and keypad or is it a bare board?
- What signals does it send to the motor drivers, step and direction or analogue, what is the maximum pulse frequency, and how many inputs and outputs does it have?
- Is a manual or wiring diagram available in English, and what supply voltage does the unit need?
What this listing is good for
Fits a builder or retrofitter of a small special-purpose machine with three or four axes who wants to try a very low-cost controller and can wire it from the manual. It is the wrong choice for anyone who needs Mach3 or LinuxCNC compatibility, which the title never mentions.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $15.60 each | In yuan |
|---|---|---|
| 20 | $312 | ¥2,080 |
| 100 | $1,560 | ¥10,399 |
| 300 | $4,680 | ¥31,197 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other controllers listings
This $15.60 listing ranks 1st cheapest among 5 comparable ones, which run $15.60 to $84.52 (median $31.99). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC controller orders
Count axes and outputs against your machine
A three-axis card cannot drive a fourth rotary axis, and a 2/4-axis controller may count a rotary axis differently. List the axes, spindle control and limit-switch inputs you need, then ask the seller for the number of pulse outputs, input channels and the maximum pulse frequency.
Check signal levels and driver compatibility
Stepper and servo drivers expect specific signal types and voltages. Ask whether the controller outputs differential or single-ended pulse and direction signals, what voltage the logic runs at, and which drivers the seller has tried it with. Request a wiring diagram before ordering so the cable plan can be prepared before the machine is wired.
Buying this item: common questions
Which CNC controller suits a small engraving machine?
It depends on your drivers and how you work. A control card is the lowest-priced option but needs a PC; an offline controller reads files from a USB drive and removes the computer. The three-axis card here is listed for stone and jade engraving, the offline unit for multi-axis engravers. Confirm axes, signals and software with the seller first.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the 3-axis 4-axis G-code CNC controller?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar controllers listings
-
3D Enhanced Engraving Machine Control Card, 3-Axis Motion, Weihong Card for Jade and Stone
$23.07Observed 27 October 2026, not a quote
View listing -
Duopukang M3A/M3C Touchscreen PLC CNC System, 2/4-Axis Programmable Pulse Controller
$84.52Observed 27 October 2026, not a quote
View listing -
LinuxCNC Control Card, Mesa Card F7I92, CNC Control Card
$31.99Observed 27 October 2026, not a quote
View listing
Buying the 3-axis 4-axis G-code CNC controller for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


