Illustrative render
Spindles
Engraving Machine Spindle Motor 2.2, 800/1.5/3.7/5.5/7.5kW, Water-Cooled, Metal and Stone
$76.56¥510 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this water-cooled spindle motor for stone listing says
This water-cooled engraving spindle is offered for metal and stone from 800W up to 7.5KW, with 2.2KW shown first and ratings of 1.5, 3.7, 5.5 and 7.5KW also listed. The Chinese wording mentions both high precision and waterproofing, but states no runout figure, voltage, speed, neck diameter or collet size. Cutting stone usually adds a coolant spray on the work, which is a separate matter from spindle cooling. The observed US$76.56 (CNY 510.49) presumably applies to one rating, probably the 2.2KW one.
| Type | Engraving machine spindle motor |
|---|---|
| Cooling | Water-cooled, waterproof (seller wording) |
| Power options | 800W, 1.5KW, 2.2KW, 3.7KW, 5.5KW, 7.5KW |
| Applications | Metal and stone |
What we confirm with the machine seller first
- Which rating is priced at the observed amount, and what do the 3.7KW, 5.5KW and 7.5KW options cost?
- What are the neck diameter and maximum speed at each rating, and which collet type does the 7.5KW unit use?
- What runout does the spindle nose measure with a test bar, and which bearing type and lubrication does the spindle use?
- How is the water jacket sealed against coolant spray, and what pump flow and inverter do you recommend for stone cutting?
Who this machine or part suits
Sensible for a stone or metal engraving shop adding a stronger spindle to an existing router, and for spares resellers. It is the wrong choice for a machine with a light gantry, because the higher ratings in this range add weight and need a matching drive.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $76.56 each | In yuan |
|---|---|---|
| 5 | $383 | ¥2,552 |
| 20 | $1,531 | ¥10,210 |
| 50 | $3,828 | ¥25,525 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other spindles listings
Of 14 spindles listings, this is the 10th cheapest at $76.56; the range is $6.88 to $154, median $69.44. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC spindle motor orders
Check the inverter or driver
Higher-power AC spindles generally need a variable-frequency drive matched to the motor's power and frequency, while the 48V units run from a DC supply and speed controller. A listing usually prices the motor alone. Ask whether the drive is included, which output frequency it is set for, and what cable length is supplied.
Measure body diameter and collet series
Spindle bodies come in different outside diameters and in round or square shapes, and the clamp or bracket on your machine must match. The collet fitted also limits shank size; the small spindles here mention ER11. Ask for body diameter, length, shaft projection and collet series, and compare them with your mounting drawing before paying.
Questions about this CNC listing
Is an ER11 spindle strong enough for cutting metal?
Usually not for heavy metal cutting. An ER11 collet holds only small shank diameters, so it suits engraving, PCB drilling and light cuts. The ER11 listings here are a pair of 500W-class motors and a small DC drilling spindle. For heavier work, look at the larger air- or water-cooled spindles and confirm the collet series with the seller.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the water-cooled spindle motor for stone?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar spindles listings
-
Beijing Jingdiao Spindle Motor, 58/62/65 mm Diameter, 0.8 kW to 2.2 kW Electric Spindle for Moulds
$77.20Observed 27 October 2026, not a quote
View listing -
Round Air-Cooled High-Speed Engraving Spindle Motor 800W/1.5KW/2.2KW, Small
$76.19Observed 27 October 2026, not a quote
View listing -
Jingrui Waterproof Engraving Spindle Motor Power Head 1.5/2.2/3/4.5/5.5KW
$75.83Observed 27 October 2026, not a quote
View listing
Buying the water-cooled spindle motor for stone for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


