Skip to content

Spindles

CNC Spindle Motor Wholesale From China: Small-Batch Buying Guide

A CNC spindle motor is the rotating cutting head of an engraving or routing machine, normally a high-speed electric motor that holds a cutter in an ER collet. Small wholesale buyers include machine builders who upgrade or repair engravers, resellers who stock replacement spindles, workshops that retrofit a router, and PCB makers who want a light drilling spindle. Spindles from China are usually sold as the motor alone, so the drive, cables and mounting bracket often come separately.

The twelve listings on this page cover a small DC drilling spindle, two 48V 500W motors (one with external brushes), and air- and water-cooled units with power options from 800W up to 7.5KW. Each shows a headline price that most likely belongs to one variant, with the rest of the power range behind a dropdown. They do not show run-out, bearing type, mains voltage, shaft size or the cost of the drive, so those need confirming variant by variant before ordering.

What the spindles listings look like

Across the twelve spindle listings, observed prices run from US$6.88 to US$154.20, with a median of US$69.44, and the spread follows type more than brand. The lowest is a small DC drilling spindle with an ER11 collet. Next come 48V 500W air-cooled ER11 motors, one with external carbon brushes. Most of the rest are 800W-class and larger air- or water-cooled spindles in round and square bodies, and the top-priced listing is an ISO20/BT30 automatic tool-change spindle.

Spindles: archived listings from 27 October 2026

Pictures are AI-generated redraws of the seller's listing photos, not photographs of what you would receive. Prices are the figures shown on each listing on 27 October 2026, converted at ¥6.668 to the US dollar.

What we check on CNC spindle motor orders

Pick the cooling method with the install in mind

Air-cooled spindles are simpler to fit because they need no pump or tank, but they are usually louder and rely on airflow around the body. Water-cooled spindles run cooler and quieter and need a pump, hose and reservoir. Ask whether cooling parts are included, and note that a title saying waterproof is not the same as water-cooled.

Confirm power, voltage and phase together

Titles pack several ratings into one listing, such as 800W up to 7.5KW, and each rating usually has its own voltage and price. Ask which rating the shown price belongs to and whether the motor is single-phase or three-phase. A mismatch with your inverter or supply is an easy mistake, so write the exact model into the order.

Check the inverter or driver

Higher-power AC spindles generally need a variable-frequency drive matched to the motor's power and frequency, while the 48V units run from a DC supply and speed controller. A listing usually prices the motor alone. Ask whether the drive is included, which output frequency it is set for, and what cable length is supplied.

Measure body diameter and collet series

Spindle bodies come in different outside diameters and in round or square shapes, and the clamp or bracket on your machine must match. The collet fitted also limits shank size; the small spindles here mention ER11. Ask for body diameter, length, shaft projection and collet series, and compare them with your mounting drawing before paying.

Ask about brushes, bearings and run-out

A brush-type spindle uses carbon brushes that wear and need replacing, and one listing says they are mounted externally. For any spindle, ask for the bearing type, a stated run-out figure, and whether spare brushes or bearings can ship with the order. Claims such as low temperature rise or 24-hour running are the seller's words, so ask for a test video.

Buying CNC spindle motor in small wholesale quantities

Order one spindle of each power and cooling type you plan to resell, and run each on a test rig or machine before stocking more. Spindles of several power ratings often share one listing, so state the exact power, voltage and collet in the order. They are dense for their size, so mixed cartons with collets and cutters are practical, and we can add foam packing and a clear label for the rating. Minimums depend on the seller's variant, and many sellers will sell one piece.

Spindles questions

How much does a CNC spindle motor cost from China?

Observed on the listings, prices run from US$6.88 to US$154.20, with a median of US$69.44, but those are not quotes. The shown figure normally matches one power or cooling variant, so the unit you need can cost more. Landed cost adds our service fee, domestic China freight, international freight, duty and import tax.

Is an ER11 spindle strong enough for cutting metal?

Usually not for heavy metal cutting. An ER11 collet holds only small shank diameters, so it suits engraving, PCB drilling and light cuts. The ER11 listings here are a pair of 500W-class motors and a small DC drilling spindle. For heavier work, look at the larger air- or water-cooled spindles and confirm the collet series with the seller.

Should I buy an air-cooled spindle or a water-cooled one?

Choose air-cooled for simple installation with no pump or tank. Choose water-cooled for long runs, a quieter machine or higher power, and accept the plumbing and the risk of leaks. The listings here include both types, so decide on duty cycle and workshop conditions, then ask whether cooling parts are included.

Can I order several spindle models from different sellers in one purchase?

Yes. We can buy spindles from different sellers in a single purchase, receive and inspect them at our warehouse in China, and ship them together with other items such as collets and cutters. Each seller sets minimums per variant and many sell single pieces, so a mixed test order is possible before a larger wholesale lot.

Importing CNC spindle motor to your market

Taxes, paperwork and product rules differ by destination. These guides cover the landed-cost mechanics for each market we are asked about most.

Other product groups

Not sure which CNC spindle motor listing fits? Tell us the use, the quantity and where it ships and we shortlist listings and return an itemised delivered price.

Ask about spindles

Source: Archived Taobao listing observations. A listing can be sold out, repriced or removed at any time. Brand names and fitment on a listing are the seller's claims and have not been verified.