Illustrative render
Workholding
GT Precision Modular Vise for CNC Machining Centers, Multi-Station, 6-8 Inch
$16.44¥110 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this modular CNC machine vise 6-8 inch listing says
Sold as a modular, multi-station precision vise for machining centres and mills, this listing carries the seller's GT prefix and a size string that reads 6, 7 and 8 inch run together, so the available jaw sizes need confirming. The title also says the vises are equal-height, which suggests they are meant to be mounted side by side on one table. Material, hardness, jaw opening and clamping method are not stated. The observed listing price is about US$16.44 (CNY 109.64); it probably refers to the smallest variant.
| Type | Modular precision vise, multi-station |
|---|---|
| Sizes | 6 to 8 inch (as titled, run together) |
| Machines | CNC machining centre, milling machine |
| Feature | Equal-height design |
Questions for the seller before you buy a machine
- Which sizes exist in this listing (6, 7 and 8 inch are suggested), and what is the price of each size?
- What jaw opening and jaw height does each size have, and what is the vise body made of?
- Is the vise sold singly or as a multi-station set, and what fixing screws or base plate come with it?
- What flatness and parallelism does the seller state for the base and jaws, and is there a measurement record?
Who this machine or part suits
Suits a machining shop adding vises to a pallet, where several similar clamps must stand at the same height. Choose another route if the work depends on the claimed precision, since the title gives no parallelism or repeatability figure.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $16.44 each | In yuan |
|---|---|---|
| 20 | $329 | ¥2,193 |
| 100 | $1,644 | ¥10,964 |
| 300 | $4,932 | ¥32,892 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other workholding listings
Of 14 workholding listings, this is the 10th cheapest at $16.44; the range is $0.46 to $27.92, median $4.45. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC workholding clamps orders
Plan for air supply on pneumatic units
Pneumatic OK clamps and vises need compressed air at a suitable pressure, plus hoses, fittings and usually a valve. Ask whether any of that is included, what pressure the clamp needs and which thread the inlet uses. If your workshop has no air supply, a manual alternative may be the more sensible choice.
Tell near-identical listings apart
Two workpiece locator listings share the same title yet are observed at US$4.31 and US$4.59, and several OK clamp listings differ only by multi-station, bidirectional or pneumatic wording. Ask each seller for dimensions, material, weight and pack contents, and keep photos of the exact item so you know which variant you are buying.
Questions about this CNC listing
Is a mini bench vise suitable for CNC machining?
Usually not as the main clamp. The mini vise on this page is listed for home and woodworking use, with no stated clamping force or flatness. For CNC milling, look at machining-center vises or fixtures and ask for specifications. A light vise may suit small, soft stock on a desktop router if the base can be fixed.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Can I order just one unit of the modular CNC machine vise 6-8 inch?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar workholding listings
-
Precision Pneumatic Vise for CNC Machining Centers, Quick Automatic MC Vise, Angle-Fixed
$17.79Observed 27 October 2026, not a quote
View listing -
Two-Hole EDM Copper Electrode Holder, NK80 Steel, Chrome-Plated, Hardened
$6.66Observed 27 October 2026, not a quote
View listing -
Precision Pneumatic Vise for CNC Machining Centers, Heavy-Duty, Milling, Drill-Tap
$18.20Observed 27 October 2026, not a quote
View listing
Want the modular CNC machine vise 6-8 inch delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


