Illustrative render
Tool holding
High-Precision Spring Steel Collets for CNC Lathes 36/46/52/0640, Round, Hex, Square Hole
$8.23¥54.88 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this CNC lathe spring collets listing says
Four lathe collet families, 36, 46, 52 and 0640, are listed here as spring steel collets with round, hexagonal or square bores for CNC lathes. These family numbers appear to name the lathe or collet series rather than a bore size, and a collet only works in a lathe that uses the matching series. Hole shape matters because hex and square bores hold bar stock of that profile, not round stock. The title omits bore ranges and hardness figures. The observed US$8.23 (CNY 54.88) presumably applies to one collet of one type.
| Type | Spring steel lathe collets |
|---|---|
| Series named | 36, 46, 52, 0640 |
| Hole shapes | Round, hex, square |
| Use | CNC lathes |
What we confirm with the machine seller first
- Which series and hole shape does the observed price belong to, and what is the price for the hex and square options?
- What bore sizes can be supplied per series, and what tolerance applies to the round holes for gripping bar stock?
- Which spring steel grade and hardness range are used, and is the collet ground after heat treatment?
- Can you confirm from our lathe's model or spindle drawing that the series matches before shipping?
Who this machine or part suits
Sensible for a lathe owner or repair shop that knows their machine takes the 36, 46, 52 or 0640 series and needs spare collets for round, hex or square bar. It is the wrong choice if you have an ER-collet lathe, as these series are not interchangeable with ER.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $8.23 each | In yuan |
|---|---|---|
| 20 | $165 | ¥1,098 |
| 100 | $823 | ¥5,488 |
| 300 | $2,469 | ¥16,464 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other tool holding listings
Of 14 tool holding listings, this is the 13th cheapest at $8.23; the range is $1.06 to $15.40, median $2.19. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for ER collet orders
State the bore diameter for every collet
Each collet grips a narrow range of shank diameters, and the listing price often applies to one bore only. Write down each shank size you use, such as 3.175 mm or 6 mm, and ask the seller to confirm the bore for the matching variant. A single listing may be sold per piece or as a set, so read the variant names carefully.
Check shank length and taper on holders
Holders and extension shanks must match the machine's spindle interface, whether a straight shank, a BT40 taper or another standard. Ask for overall length, shank diameter, taper standard and the maximum rated speed. For the BT40 and C32/C42 items, also ask whether pull studs or draw bars are included, since they may be sold separately.
Questions about this CNC listing
What is an ER collet and which size do I need?
It is a slotted sleeve that clamps a cutter shank in a spindle nut. The series you need depends on the nut on your spindle, not on the cutter: ER11 suits small engraving spindles, and larger series suit bigger spindles. Once you have the series, choose the bore that matches each cutter shank.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the CNC lathe spring collets?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar tool holding listings
-
C32/C42 Heavy-Duty Straight Shank Collet Chuck, High-Precision, Boring Head Reducer Sleeve
$15.40Observed 27 October 2026, not a quote
View listing -
$6.46Observed 27 October 2026, not a quote
View listing -
Taiwan High-Precision ER Collets ER8/ER11/ER16/ER20/ER25/ER32, UP
$6.44Observed 27 October 2026, not a quote
View listing
Buying the CNC lathe spring collets for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


