Skip to content

Rotary axes

CNC 4th Axis Rotary Table, Worm Gear Indexing Plate for Machining Centers

$1,005¥6,704 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this worm gear 4th axis rotary table listing says

Worm-and-wheel gearing is the one design fact this listing offers: a CNC fourth-axis rotary table, called an indexing plate and rotary work table for machining centres. Worm drives are a common way to get a high reduction and some self-holding, but the title gives no ratio, backlash, table diameter or rated torque. It also does not say whether a servo motor or a chuck is part of the sale. At an observed listing price of about US$1,005.36 (CNY 6,703.76), this is a purchase that justifies a sample check and the seller's drawing.

TypeCNC 4th axis rotary table
DriveWorm gear (worm and wheel)
FunctionIndexing plate, rotary work table
MachinesMachining centres

Questions for the seller before you buy a machine

  • What are the worm gear ratio and the measured backlash, and does the table have a clamp or brake?
  • What are the table diameter, centre height and rated load, and what cutting torque can it hold?
  • Is a servo or stepper motor included, and what controller signal does the table expect?
  • Which lubricant does the worm gear use, and what service interval does the seller recommend?

What this listing is good for

Ideal for a machining shop adding a fourth axis for general metal parts that can check a drawing and take delivery of a sample first. Choose another route if the work needs accuracy documented to a tolerance, since the title gives none.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $1,005 eachIn yuan
1$1,005¥6,704
3$3,016¥20,111
5$5,027¥33,519

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other rotary axes listings

This $1,005 listing ranks 12th cheapest among 13 comparable ones, which run $86.76 to $6,813 (median $240). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC rotary axis orders

Decide between manual and motor-driven

Hand-crank units divide angles by turning a handle and a dividing plate, and do not connect to a controller. A CNC fourth axis has a motor and needs a driver and a controller axis. Ask which type the listing is, whether the motor and driver are included, and whether the unit will rotate while a program runs.

Plan weight, freight and mounting before buying

Rotary tables and dividing heads are dense cast or steel units that can weigh more than expected, and the five-axis and cam roller types carry a high unit value. Ask for packed weight and dimensions, and plan crating. Also confirm mounting hole patterns, T-slot size and cable connectors against your machine.

All rotary axes checks and listings

Buying this item: common questions

Which rotary axis should I order first as a sample?

Pick the one closest to what you expect to resell most, in the smallest size that fits your test machine. Test run-out, backlash and mounting on that unit, then ask us to buy the next size up from the same seller. The size code on the listing must be written into the order, since price depends on it.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the worm gear 4th axis rotary table?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the worm gear 4th axis rotary table delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.