Illustrative render
Rotary axes
Zero-Backlash Cam Roller 4th Axis Rotary Table, CNC Indexing Head for Machining Centers
$688¥4,591 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this zero-backlash cam roller rotary table listing says
Zero backlash is the claim this listing puts first, on a cam roller fourth-axis rotary table for machining centres, sold as a numerical-control indexing head and a four-axis rotary dividing plate. No backlash figure, measuring method or accuracy grade is attached, so zero should be read as a goal, not a measured value. It is observed at about US$688.49 (CNY 4,590.84), only about five dollars from the neighbouring cam roller listing, which makes the claim the main difference between them. Size, motor and load rating are not given.
| Type | Cam roller 4th axis rotary table |
|---|---|
| Claim | Zero backlash (seller wording) |
| Machines | Machining centres |
| Function | Numerical-control indexing head, dividing plate |
What we confirm with the machine seller first
- What measured backlash figure is behind zero backlash, and which instrument and method were used?
- How does this table differ from your cam roller table listed about five dollars lower?
- What table diameter, centre height and rated load does it have, and is a servo motor included?
- What is the cam drive's reduction ratio, and what are the indexing time and positioning repeatability?
What this listing is good for
Helpful to a buyer comparing cam roller tables for a fourth-axis conversion who can test backlash on delivery. It is the wrong choice if zero backlash is a hard requirement, because the claim has no figure and cannot be assumed.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $688 each | In yuan |
|---|---|---|
| 1 | $688 | ¥4,591 |
| 3 | $2,065 | ¥13,773 |
| 5 | $3,442 | ¥22,954 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other rotary axes listings
This $688 listing ranks 10th cheapest among 13 comparable ones, which run $86.76 to $6,813 (median $240). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC rotary axis orders
Ask about backlash, repeatability and gearing
Titles claim zero backlash for a cam roller table and an electric head, while others use worm gears. Ask for backlash and repeatability on a datasheet, plus the gear ratio, since these set positioning accuracy and the pulses needed per degree. A servo or stepper choice also changes which controller output you need.
Tell near-identical indexing heads apart
Three horizontal/vertical universal heads carry almost identical titles but are observed at US$210.90, US$227.87 and US$229.42. Ask each seller for chuck size, dividing-plate type, centre height, spindle bore, weight and whether a tailstock is included, then request photos of the exact stock to see which one you are buying.
Buying this item: common questions
Is a 4th axis rotary table the same as an indexing head?
Not exactly. The manual type divides the circle into set steps, often by hand crank, while a 4th axis rotary table is driven by a motor and moves under program control. Several listings use both terms together, so ask whether the unit has a motor, what drives it, and whether it takes commands from your controller.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the zero-backlash cam roller rotary table?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar rotary axes listings
-
CNC Servo Indexing Head FK15110/125/145/160, 4th Axis Rotary Table
$918Observed 27 October 2026, not a quote
View listing -
Cam Roller Rotary Table, CNC 4th Axis for Machining Centers, Automatic Indexing Head
$684Observed 27 October 2026, not a quote
View listing -
CNC 4th Axis Rotary Table, Worm Gear Indexing Plate for Machining Centers
$1,005Observed 27 October 2026, not a quote
View listing
Buying the zero-backlash cam roller rotary table for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


