Skip to content

Spindles

Automatic Tool Change Spindle ISO20/BT30, High-Speed Water-Cooled, Metal Molds, Engraving

$154¥1,028 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this automatic tool change spindle ISO20 listing says

An automatic tool change spindle lets the machine swap cutters from a tool magazine during a program, and this listing offers a water-cooled high-speed one with ISO20 or BT30 taper for metal molds and engraving. ISO20 and BT30 are different tool-holder tapers, so a variant must be chosen first. The title gives no power, speed, drawbar pressure or air supply requirement, and does not say whether a magazine, solenoid valve or controller support is included. The observed US$154.20 (CNY 1028.20) looks low for a complete tool-change system, so ask what it covers.

TypeAutomatic tool change electric spindle
Taper optionsISO20, BT30
CoolingWater-cooled
ApplicationsMetal molds, engraving

Questions for the seller before you buy a machine

  • Which taper is priced at the observed amount, ISO20 or BT30, and what is the price difference and pull stud standard for each?
  • What are the power, speed range, and clamping and release air pressure, and what air supply is required for the unclamp mechanism?
  • Does the price include the drawbar cylinder, solenoid valve, proximity sensors and cabling, or only the spindle body?
  • Which control cards or software have you seen drive the tool change, and is there a wiring diagram for the unit we would receive?

What this listing is good for

Fits a builder adding automatic tool change to a custom mill or router who can design the air supply and magazine. It is the wrong choice for a buyer wanting a plug-and-play upgrade for a stock machine, since this spindle needs matching mechanics and control signals.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $154 eachIn yuan
1$154¥1,028
3$463¥3,085
5$771¥5,141

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other spindles listings

This $154 listing ranks 14th cheapest among 14 comparable ones, which run $6.88 to $154 (median $69.44). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC spindle motor orders

Measure body diameter and collet series

Spindle bodies come in different outside diameters and in round or square shapes, and the clamp or bracket on your machine must match. The collet fitted also limits shank size; the small spindles here mention ER11. Ask for body diameter, length, shaft projection and collet series, and compare them with your mounting drawing before paying.

Ask about brushes, bearings and run-out

A brush-type spindle uses carbon brushes that wear and need replacing, and one listing says they are mounted externally. For any spindle, ask for the bearing type, a stated run-out figure, and whether spare brushes or bearings can ship with the order. Claims such as low temperature rise or 24-hour running are the seller's words, so ask for a test video.

All spindles checks and listings

Buying this item: common questions

Is an ER11 spindle strong enough for cutting metal?

Usually not for heavy metal cutting. An ER11 collet holds only small shank diameters, so it suits engraving, PCB drilling and light cuts. The ER11 listings here are a pair of 500W-class motors and a small DC drilling spindle. For heavier work, look at the larger air- or water-cooled spindles and confirm the collet series with the seller.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the automatic tool change spindle ISO20?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the automatic tool change spindle ISO20 delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.