Skip to content

Spindles

Square Air-Cooled Spindle Motor for Engraving Machines, 2.2 kW, 3.5 kW and 6 kW, for Routing, Drilling, Slotting and Polishing

$55.04¥367 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this square spindle motor 2.2kW 3.5kW 6kW listing says

Ratings of 2.2, 3.5 and 6 kW are sold under this title for a square-bodied, air-cooled electric spindle that the seller points at engraving machines doing cutting-out, drilling, slotting and polishing. The Chinese word for the first job usually means cutting parts out of sheet stock, so routing flat panels is the likely use. No brand is claimed, and the observed US$55.04 (CNY 366.98) is about half the price of the six-rating square spindle we also list. The title gives no voltage, speed, collet size, housing dimensions or fan detail, and the price probably belongs to the 2.2 kW version.

TypeSquare-body electric spindle motor
CoolingAir-cooled
Power options2.2 kW, 3.5 kW, 6 kW
MachinesEngraving machines
Jobs namedCutting out, drilling, slotting, polishing

Questions for the seller before you buy a machine

  • Which rating does the observed price of US$55.04 cover, and what are the separate prices of the 3.5 kW and 6 kW versions?
  • What are the housing dimensions and mounting hole pattern for each rating, so we can check them against a flat spindle mounting plate?
  • What voltage, frequency, speed range, collet size and runout figure apply, and is an inverter or fan power lead included in the order?
  • What bearing type and fan arrangement does each rating use, and is there a stated limit on continuous running at full power for the 6 kW version?

Who this machine or part suits

Useful for a router builder or workshop that wants a square-mount air-cooled spindle in the mid to high power range for cutting sheet, drilling and slotting, and can fit the housing to a flat plate. It is the wrong choice for a small desktop gantry, where a 6 kW body is usually heavy and loud.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $55.04 eachIn yuan
5$275¥1,835
20$1,101¥7,340
50$2,752¥18,349

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other spindles listings

Of 14 spindles listings, this is the 5th cheapest at $55.04; the range is $6.88 to $154, median $69.44. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC spindle motor orders

Pick the cooling method with the install in mind

Air-cooled spindles are simpler to fit because they need no pump or tank, but they are usually louder and rely on airflow around the body. Water-cooled spindles run cooler and quieter and need a pump, hose and reservoir. Ask whether cooling parts are included, and note that a title saying waterproof is not the same as water-cooled.

Measure body diameter and collet series

Spindle bodies come in different outside diameters and in round or square shapes, and the clamp or bracket on your machine must match. The collet fitted also limits shank size; the small spindles here mention ER11. Ask for body diameter, length, shaft projection and collet series, and compare them with your mounting drawing before paying.

All spindles checks and listings

Questions about this CNC listing

How much does a CNC spindle motor cost from China?

Observed on the listings, prices run from US$6.88 to US$154.20, with a median of US$69.44, but those are not quotes. The shown figure normally matches one power or cooling variant, so the unit you need can cost more. Landed cost adds our service fee, domestic China freight, international freight, duty and import tax.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Can I order just one unit of the square spindle motor 2.2kW 3.5kW 6kW?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Want the square spindle motor 2.2kW 3.5kW 6kW delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.