Illustrative render
Spindles
High-Speed Water-Cooled Spindle Motor Set 800W/1.5KW/2.2KW for Engraving, Woodworking
$58.31¥389 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this water-cooled spindle motor set listing says
This listing sells a water-cooled high-speed spindle as a set in 800W, 1.5KW and 2.2KW ratings for engraving and woodworking machines. The word set suggests extra parts such as a clamp, nut or collets, but the title never says which. Water cooling normally requires a pump, tank, tubing and fittings, which are often separate purchases. Voltage, speed, neck diameter and collet size are missing, and the observed US$58.31 (CNY 388.81) presumably applies to the smallest rating. Choose the rating first, then ask for the contents list.
| Type | High-speed electric spindle motor set |
|---|---|
| Cooling | Water-cooled |
| Power options | 800W, 1.5KW, 2.2KW |
| Applications | Engraving, woodworking |
What we confirm with the machine seller first
- Which items make up the set: spindle, clamp, collets, nut, pump or inverter, and which of them are covered by the observed price?
- What price applies to the 1.5KW and 2.2KW options, and what are their neck diameters and collet sizes?
- Which tubing size, pump flow and coolant do you recommend, and can you supply a small circulation pump with the order?
- What voltage, frequency and speed does each rating use, and does the inverter run from single-phase mains?
What this listing is good for
Suits a woodworking router builder who wants water cooling for quieter, long-duty cutting and can plumb a small pump circuit. It is the wrong choice for a portable or bench setup without space for a coolant tank, where an air-cooled spindle is simpler.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $58.31 each | In yuan |
|---|---|---|
| 5 | $292 | ¥1,944 |
| 20 | $1,166 | ¥7,776 |
| 50 | $2,916 | ¥19,441 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other spindles listings
This $58.31 listing ranks 6th cheapest among 14 comparable ones, which run $6.88 to $154 (median $69.44). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC spindle motor orders
Confirm power, voltage and phase together
Titles pack several ratings into one listing, such as 800W up to 7.5KW, and each rating usually has its own voltage and price. Ask which rating the shown price belongs to and whether the motor is single-phase or three-phase. A mismatch with your inverter or supply is an easy mistake, so write the exact model into the order.
Measure body diameter and collet series
Spindle bodies come in different outside diameters and in round or square shapes, and the clamp or bracket on your machine must match. The collet fitted also limits shank size; the small spindles here mention ER11. Ask for body diameter, length, shaft projection and collet series, and compare them with your mounting drawing before paying.
Buying this item: common questions
Is an ER11 spindle strong enough for cutting metal?
Usually not for heavy metal cutting. An ER11 collet holds only small shank diameters, so it suits engraving, PCB drilling and light cuts. The ER11 listings here are a pair of 500W-class motors and a small DC drilling spindle. For heavier work, look at the larger air- or water-cooled spindles and confirm the collet series with the seller.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the water-cooled spindle motor set?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar spindles listings
-
Changsheng High-Speed Water-Cooled Spindle Motor 800W/1.5/2.2/3KW, Woodworking Engraving
$63.05Observed 27 October 2026, not a quote
View listing -
$55.04Observed 27 October 2026, not a quote
View listing -
Air-Cooled High-Speed Engraving Spindle Motor 800W/1.5KW/2.2/3.5KW/4.5KW/6KW
$41.59Observed 27 October 2026, not a quote
View listing
Buying the water-cooled spindle motor set for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


