Skip to content

Workholding

Bidirectional M6 OK Clamp, Extended, Expanding Clamping Block Fixture for CNC Machining

$0.46¥3.04 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this M6 OK clamp expanding block listing says

This listing is a bidirectional OK clamp, a small expanding clamping block that workshops sometimes screw into a fixture plate to push a workpiece against a locating face. The title gives an M6 size and says the body is extended, so it is longer than the usual short block. It does not state the material, the clamping stroke, the hole pattern or whether a screw comes with it. The observed listing price is about US$0.46 (CNY 3.04), which is low enough that the unit (one piece or a set) needs confirming before anyone treats it as a per-clamp cost.

TypeBidirectional OK clamp, expanding clamping block
Thread sizeM6 (as titled)
BodyExtended (longer) version
ApplicationCNC machining fixtures and jigs

Questions for the seller before you buy a machine

  • What is the overall length of the extended body, and how far does each side of the block travel before the clamp bottoms out?
  • Is M6 the mounting screw size, and is a screw included with every clamp or must it be ordered separately?
  • Which steel is the body made from, and is the wedge face hardened or only surface-coated?
  • Is the price for a single clamp, a pair or a bag, and what is the smallest quantity the seller will pack for one order?

Who this machine or part suits

Good for a workshop or jig builder who wants a few expanding side clamps to try in a fixture plate at very low cost. Skip it when a drawing demands a rated clamping force or a repeatable stop position, because the title gives no force, stroke or tolerance.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $0.46 eachIn yuan
100$46.00¥304
500$230¥1,520
1,000$460¥3,040

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other workholding listings

Of 14 workholding listings, this is the 1st cheapest at $0.46; the range is $0.46 to $27.92, median $4.45. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC workholding clamps orders

Confirm jaw width, opening and variant size

Vise and chuck listings often cover several sizes under one price: 6 to 8 inch for the modular vise, K11-80 up to 250 for the chuck. The price shown is likely for the smallest variant. Ask for jaw width, maximum opening and the price for your size, and compare them with the table size and travel of your machine.

Ask for clamping force and repeatability as numbers

Titles use words like precision, heavy-duty and quick, which are not measurements. For vises, ask for clamping force, jaw parallelism and repeat accuracy on a datasheet. For OK-style expanding blocks, ask for the clamping range and the bolt size, since the listed M6 only fits fixtures drilled and tapped to that thread.

All workholding checks and listings

Questions about this CNC listing

Where can I buy CNC workholding clamps in small quantities?

On Taobao and 1688 many sellers list clamps and vises by the piece, so a small test order is usually possible. We check the exact variant and seller, buy items from different sellers in one purchase, and inspect them at our warehouse in China before shipping. Minimums are set by the seller for each variant.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Can I order just one unit of the M6 OK clamp expanding block?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Want the M6 OK clamp expanding block delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.