Skip to content

Workholding

Pneumatic OK Clamp, Multi-Station Wedge-Type Expanding Clamping Block for CNC Machining Centres and Side-by-Side Precision Vises

$1.20¥8.03 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this wedge-type OK clamp expanding block listing says

Priced at US$1.20 (CNY 8.03) observed, this pneumatic OK clamp is roughly a third below the other pneumatic multi-station OK listings we carry, which sit near US$1.84. The title describes a multi-station, wedge-type expanding clamping block for CNC machining centres, and what it calls side-by-side precision vises. Unlike its neighbours, it does not say bidirectional. No stroke, air pressure, thread or station count is given, and nothing says whether the price covers an air cylinder or only the block.

TypeOK clamp, wedge-type expanding clamping block
DrivePneumatic (as titled)
StationsMulti-station
ApplicationCNC machining centres
Described asSide-by-side precision vises

What we confirm with the machine seller first

  • Does the observed price of US$1.20 buy one clamp block only, or a block with cylinder, fittings and valve, and how many stations does each block have?
  • What do side-by-side and side clamping mean here: are several blocks meant to sit in a row on one plate, and what pitch or spacing is supported?
  • Which air pressure range does it need, what stroke does the wedge give, and what clamping force can you state at a given pressure?
  • Does it clamp in both directions or only one, what is the mounting thread or hole pattern, and can you send a dimensioned drawing before a lot order?

Who this machine or part suits

Worth ordering as a trial unit by a fixture maker planning a row of air-driven side clamps on a machining-centre plate. It is the wrong choice where no compressed air reaches the plate, or where production safety rules demand a documented clamping force, which the title never gives.

Goods cost at the listed price

Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.

QuantityGoods at $1.20 eachIn yuan
100$120¥803
500$600¥4,015
1,000$1,200¥8,030

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other workholding listings

Of 14 workholding listings, this is the 2nd cheapest at $1.20; the range is $0.46 to $27.92, median $4.45. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.

Two checks that matter for CNC workholding clamps orders

Confirm jaw width, opening and variant size

Vise and chuck listings often cover several sizes under one price: 6 to 8 inch for the modular vise, K11-80 up to 250 for the chuck. The price shown is likely for the smallest variant. Ask for jaw width, maximum opening and the price for your size, and compare them with the table size and travel of your machine.

Allow for weight and rust protection

Vises, chucks and fixtures are dense steel items and can weigh far more than their price suggests, which raises freight. Ask for packed weight per piece, how machined faces are protected from rust, and whether parts are oiled. In mixed shipments, box heavy items separately from precision accessories to avoid damage.

All workholding checks and listings

Questions about this CNC listing

Is a mini bench vise suitable for CNC machining?

Usually not as the main clamp. The mini vise on this page is listed for home and woodworking use, with no stated clamping force or flatness. For CNC milling, look at machining-center vises or fixtures and ask for specifications. A light vise may suit small, soft stock on a desktop router if the base can be fixed.

Is this the price of the complete machine?

No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.

Can I order just one unit of the wedge-type OK clamp expanding block?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Buying the wedge-type OK clamp expanding block for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.