Illustrative render
Workholding
Milling Machine Workpiece Locator, Universal Quick Heavy-Duty Positioning Fixture for CNC ($4.31 listing)
$4.31¥28.75 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this milling machine workpiece locator listing says
A workpiece locator for milling machines and machining centres is the subject here, and the title stresses that it is universal, quick to set and heavy-duty. Nothing in the title says what shape it takes (clamp, stop, pin or swivel block), what it is made of or what size of part it positions. A second listing carries the identical title at a slightly higher price, so the two probably differ in size, material or shop. The observed price is about US$4.31 (CNY 28.75).
| Type | Workpiece locator, positioning fixture |
|---|---|
| Features | Universal, quick, heavy-duty (as titled) |
| Machines | Milling machine, CNC machining centre |
| Use | Multi-purpose positioning |
What we confirm with the machine seller first
- What shape is this locator (stop, pin, clamp or swivel block), and what is the working range of its adjustment?
- What material and weight is the body, and which parts are hardened?
- Does one order include a single locator or a set, and are mounting bolts or T-nuts supplied?
- Can you send photos with a ruler beside the part, so we can tell this listing from the near-identical one at a higher price?
What this listing is good for
Practical for milling-machine users and small job shops who want a quick positioning aid for repeat setups and will test one before ordering many. It falls short when the part needs a fixed, documented datum, as the title gives no accuracy or repeatability figure.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $4.31 each | In yuan |
|---|---|---|
| 20 | $86.20 | ¥575 |
| 100 | $431 | ¥2,875 |
| 300 | $1,293 | ¥8,625 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other workholding listings
This $4.31 listing ranks 7th cheapest among 14 comparable ones, which run $0.46 to $27.92 (median $4.45). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC workholding clamps orders
Plan for air supply on pneumatic units
Pneumatic OK clamps and vises need compressed air at a suitable pressure, plus hoses, fittings and usually a valve. Ask whether any of that is included, what pressure the clamp needs and which thread the inlet uses. If your workshop has no air supply, a manual alternative may be the more sensible choice.
Allow for weight and rust protection
Vises, chucks and fixtures are dense steel items and can weigh far more than their price suggests, which raises freight. Ask for packed weight per piece, how machined faces are protected from rust, and whether parts are oiled. In mixed shipments, box heavy items separately from precision accessories to avoid damage.
Buying this item: common questions
Are there hold-down clamps for CNC routers on this page?
Not as a classic strap-and-stud kit: the current listings are mostly expanding clamp blocks, vises and locators. If you need T-slot hold-down clamps, tell us the slot width and table type and we can search Taobao and 1688 for matching sets and check the variant before ordering.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the milling machine workpiece locator?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar workholding listings
-
Milling Machine Workpiece Locator, Universal Quick Heavy-Duty Positioning Fixture for CNC
$4.59Observed 27 October 2026, not a quote
View listing -
Pneumatic OK Clamp, Bidirectional Multi-Station Wedge Expanding Block for CNC Machining
$1.85Observed 27 October 2026, not a quote
View listing -
Two-Hole EDM Copper Electrode Holder, NK80 Steel, Chrome-Plated, Hardened
$6.66Observed 27 October 2026, not a quote
View listing
Buying the milling machine workpiece locator for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


