Illustrative render
Workholding
Milling Machine Workpiece Locator, Universal Quick Heavy-Duty Positioning Fixture for CNC ($4.59 listing)
$4.59¥30.60 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this heavy-duty workpiece positioning fixture listing says
This is the second of two listings that share one title for a universal quick positioning fixture used on milling machines and CNC machining centres; this one is observed at about US$4.59 (CNY 30.60), roughly 6 percent above its twin. The identical wording means the title cannot tell us which one is larger, stronger or better finished. The listing page, not the title, has to show the dimensions, the mounting method and whether a pair or a single piece is included.
| Type | Workpiece locator, positioning fixture |
|---|---|
| Features | Universal, quick, heavy-duty (as titled) |
| Machines | Milling machine, CNC machining centre |
| Note | Same title as a cheaper listing |
What we confirm with the machine seller first
- Which size or variant is this listing, and how does it differ from the cheaper listing that carries the same title?
- What weight or load does heavy-duty mean for this locator, and is there a test or rating behind the claim?
- Are mounting parts such as bolts, washers and T-slot nuts packed with it?
- How is each piece packed, and is it oiled or coated against rust for sea transit?
Who this machine or part suits
Worth a look for a shop that wants to compare two similar positioning fixtures side by side before committing to a quantity. It is the wrong choice if you need to order blind from the title alone, because two listings with one title can hide different sizes.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $4.59 each | In yuan |
|---|---|---|
| 20 | $91.80 | ¥612 |
| 100 | $459 | ¥3,060 |
| 300 | $1,377 | ¥9,180 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other workholding listings
Of 14 workholding listings, this is the 8th cheapest at $4.59; the range is $0.46 to $27.92, median $4.45. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC workholding clamps orders
Confirm jaw width, opening and variant size
Vise and chuck listings often cover several sizes under one price: 6 to 8 inch for the modular vise, K11-80 up to 250 for the chuck. The price shown is likely for the smallest variant. Ask for jaw width, maximum opening and the price for your size, and compare them with the table size and travel of your machine.
Plan for air supply on pneumatic units
Pneumatic OK clamps and vises need compressed air at a suitable pressure, plus hoses, fittings and usually a valve. Ask whether any of that is included, what pressure the clamp needs and which thread the inlet uses. If your workshop has no air supply, a manual alternative may be the more sensible choice.
Questions about this CNC listing
How heavy are workholding items for shipping?
Weight varies widely: expanding blocks are small, while a 6 to 8 inch modular vise or a lathe chuck can be heavy. The listings rarely state packed weight, so ask before ordering. Heavy steel raises international freight, and consolidating it with lighter parts from other sellers can lower the cost per unit.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Can I order just one unit of the heavy-duty workpiece positioning fixture?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar workholding listings
-
Two-Hole EDM Copper Electrode Holder, NK80 Steel, Chrome-Plated, Hardened
$6.66Observed 27 October 2026, not a quote
View listing -
Milling Machine Workpiece Locator, Universal Quick Heavy-Duty Positioning Fixture for CNC
$4.31Observed 27 October 2026, not a quote
View listing -
Pneumatic OK Clamp, Bidirectional Multi-Station Wedge Expanding Block for CNC Machining
$1.85Observed 27 October 2026, not a quote
View listing
Buying the heavy-duty workpiece positioning fixture for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


