Illustrative render
Cutters and bits
Imported High-Precision Tungsten Carbide Flat-Tip Engraving Bit for CNC Metal Lettering
$2.40¥15.97 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this carbide flat tip engraving bit metal listing says
Metal lettering is the stated job for this tungsten carbide flat-tip engraving bit, which the seller calls imported and high-precision. Neither the origin nor the precision is documented in the title, and no angle, tip width, shank size or coating is given. Carbide tools of this kind typically cut brass, aluminium and mild steel shallowly, while stainless and hardened parts need a coating and slower feeds. The observed US$2.40 (CNY 15.97) is for one bit and likely for the default size. The word imported is an unverified claim.
| Type | Flat-tip engraving bit |
|---|---|
| Material | Tungsten carbide |
| Use | CNC engraving machines, metal lettering |
| Claims | Imported, high precision (seller wording) |
Questions for the seller before you buy a machine
- What shank diameter, cone angle and tip width apply to the observed price, and are other combinations offered?
- What does imported mean here: which country, and what proof, such as packaging, maker marks or an invoice, can you send?
- Which metals has this bit been used on, with what depth of cut and feed rate, and is a coating present?
- How many pieces are in one unit, and are the cutting tips inspected under magnification before dispatch?
What this listing is good for
Good for a nameplate or metal-tag engraver who wants to trial a carbide flat-tip bit for brass and aluminium lettering. It is the wrong choice for deep cutting or milling slots, and for buyers who need the origin documented rather than asserted.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $2.40 each | In yuan |
|---|---|---|
| 100 | $240 | ¥1,597 |
| 500 | $1,200 | ¥7,985 |
| 1,000 | $2,400 | ¥15,970 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other cutters and bits listings
This $2.40 listing ranks 7th cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC router bits orders
Match the cutter geometry to the material
Carbide bits sold for wood are not automatically right for metal, stone or plastic. Look at flute count, coating and geometry: a single-flute spiral cutter is sold for acrylic and PVC, while a diamond flat-bottom bit is listed for marble. Ask which material the seller tested and whether speed guidance is available.
Clarify length and the '70 degree' label
Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.
Buying this item: common questions
Can I order single bits, or must I buy a whole box?
Often single pieces are available, because many Taobao sellers sell by the piece, but the seller sets the minimum per variant and some sell packs. Observed prices on this page run from US$0.92 to US$7.81 per listed variant. Ask us to confirm the pack size before buying, then increase counts after a test cut.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Is there a minimum order for the carbide flat tip engraving bit metal?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar cutters and bits listings
-
Colorful Tungsten Carbide Triangular Pointed Engraving Bit for Wood Furniture and Jade
$2.73Observed 27 October 2026, not a quote
View listing -
Lidiao 4mm Flat-Tip Tapered Engraving Bit for CNC Relief Carving
$2.35Observed 27 October 2026, not a quote
View listing -
3.175 4mm Tungsten Carbide Flat-Tip Engraving Bit for Metal, Stainless Steel, Copper, 5A
$2.77Observed 27 October 2026, not a quote
View listing
Want the carbide flat tip engraving bit metal delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


