Skip to content

Cutters and bits

3.175 4mm Tungsten Carbide Flat-Tip Engraving Bit for Metal, Stainless Steel, Copper, 5A

$2.77¥18.46 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this flat tip engraving bit stainless steel listing says

The listing for this 3.175 and 4mm tungsten carbide flat-tip bit names stainless steel, copper and aluminum lettering as applications, and tags it 5A. The 5A tag appears to be the seller's own grade label and, as far as we know, is not a recognised standard grade, so it should not be read as a certification. Two shank sizes are offered under one price, and the title does not state cone angle, tip width, coating or length. The observed US$2.77 (CNY 18.46) cannot apply equally to both shank sizes, so ask for a price by size.

TypeFlat-tip engraving bit
MaterialTungsten carbide
Size options3.175 and 4mm
Metals namedStainless steel, copper, aluminum
Grade tag5A (seller wording)

Questions for the seller before you buy a machine

  • Is the observed price for the 3.175 or the 4mm shank, and what are the price and stock status of the other one?
  • What does 5A stand for on this bit: a carbide grade, a ground-quality tag or a supplier code? Is a datasheet available?
  • What cone angle and tip width are available, and is the bit coated for cutting stainless steel?
  • Which spindle speeds and feed rates have you used to engrave stainless steel, and what lettering depth is realistic per pass?

Who this machine or part suits

Appropriate for a metal nameplate or tag engraver using aluminum or copper, and willing to run small test depths on stainless. It is the wrong choice for buyers who read 5A as a verified grade, because the tag is the seller's, not a standard.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $2.77 eachIn yuan
100$277¥1,846
500$1,385¥9,230
1,000$2,770¥18,460

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other cutters and bits listings

Of 14 cutters and bits listings, this is the 9th cheapest at $2.77; the range is $0.92 to $7.81, median $2.56. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC router bits orders

Specify tip width and included angle

For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.

Match the cutter geometry to the material

Carbide bits sold for wood are not automatically right for metal, stone or plastic. Look at flute count, coating and geometry: a single-flute spiral cutter is sold for acrylic and PVC, while a diamond flat-bottom bit is listed for marble. Ask which material the seller tested and whether speed guidance is available.

All cutters and bits checks and listings

Questions about this CNC listing

Which CNC router bits suit engraving lettering into metal?

Carbide flat-tip tapered bits are the usual choice for metal lettering, and several listings here describe them for that use, some with DLC or titanium-type coatings in 3.175 or 4mm sizes. Whether they suit your alloy depends on spindle rigidity and feeds, so run a scrap test first and ask the seller which metals were tested.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Can I order just one unit of the flat tip engraving bit stainless steel?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Want the flat tip engraving bit stainless steel delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in United Kingdom or Australia? See the guides for wholesale desktop CNC machines for United Kingdom and wholesale desktop CNC machines for Australia. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.