Skip to content

Cutters and bits

CNC Router Bits From China: Small-Batch Wholesale Buying

CNC router bits are the cutting tools that sit in a spindle collet, and this page covers the engraving and milling cutters sold for small CNC machines. They are consumables, so sign makers, jade and stone engravers, metal letterers and tool resellers re-order them often and in mixed sizes. Buying a spread of tip widths, angles and coatings from several sellers in China in one small wholesale order is practical because each piece costs little and the fixed shipping charge can be shared.

Twelve listings make up this group, mostly carbide flat-tip tapered engraving bits in 3.175 or 4mm sizes, plus a diamond stone cutter, a long 4-flute flat end mill, a single-flute spiral cutter for plastics and a triangular pointed bit. Listings show the shank size, a general use and a price for one variant. They do not show tip width, flute length, cutting speed or the carbide grade behind labels such as 5A and 6A, so those need to be requested.

What the cutters and bits listings look like

Cost is per piece and small, with observed prices from US$0.92 to US$7.81 and a median of US$2.56. Most listings are 3.175 or 4mm flat-tip tapered bits, some with a stated angle range of 10 to 90 degrees. Others add titanium or DLC coatings, a diamond stone-cutting bit, a single-flute cutter for acrylic and PVC, and a long 4-flute end mill. The same use list can sit under very different prices.

Cutters and bits: archived listings from 27 October 2026

Pictures are AI-generated redraws of the seller's listing photos, not photographs of what you would receive. Prices are the figures shown on each listing on 27 October 2026, converted at ¥6.668 to the US dollar.

What we check on CNC router bits orders

Confirm shank diameter against your collet

A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.

Specify tip width and included angle

For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.

Match the cutter geometry to the material

Carbide bits sold for wood are not automatically right for metal, stone or plastic. Look at flute count, coating and geometry: a single-flute spiral cutter is sold for acrylic and PVC, while a diamond flat-bottom bit is listed for marble. Ask which material the seller tested and whether speed guidance is available.

Treat grade labels and brand names as claims

Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.

Clarify length and the '70 degree' label

Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.

Buying CNC router bits in small wholesale quantities

Cutters are cheap, light and easy to mix, so a small wholesale order can combine many tip widths and angles. Start with one sample of each geometry you plan to resell and test it on your own material, then keep the ones that cut cleanly. Pack by type in separate labelled tubes or foam so tips are protected and the size is visible. Minimums are set by the seller per variant, and many sell single pieces or small packs. Ask us to record shank, tip width and angle on the packing list so counts can be checked on receipt.

Cutters and bits questions

Which CNC router bits suit engraving lettering into metal?

Carbide flat-tip tapered bits are the usual choice for metal lettering, and several listings here describe them for that use, some with DLC or titanium-type coatings in 3.175 or 4mm sizes. Whether they suit your alloy depends on spindle rigidity and feeds, so run a scrap test first and ask the seller which metals were tested.

What is the difference between engraving bits and end mills?

Engraving bits usually have a fine tapered or pointed tip for lettering and relief carving, while end mills have a flat cutting end for clearing material and profiling. This page has both: tapered 3.175 and 4mm bits and a long 4-flute flat cutter. Check the geometry in the listing before assuming its use.

Can I order single bits, or must I buy a whole box?

Often single pieces are available, because many Taobao sellers sell by the piece, but the seller sets the minimum per variant and some sell packs. Observed prices on this page run from US$0.92 to US$7.81 per listed variant. Ask us to confirm the pack size before buying, then increase counts after a test cut.

Do I need to inspect CNC router bits when they arrive?

Yes, a quick check is sensible, because small tips can chip in transit and a seller can ship a different variant. We receive the goods at our warehouse in China and can check tip condition, markings and counts against your order before shipping. Tell us in advance which dimensions to measure, such as shank diameter and angle.

Importing CNC router bits to your market

Taxes, paperwork and product rules differ by destination. These guides cover the landed-cost mechanics for each market we are asked about most.

Other product groups

Not sure which CNC router bits listing fits? Tell us the use, the quantity and where it ships and we shortlist listings and return an itemised delivered price.

Ask about cutters and bits

Source: Archived Taobao listing observations. A listing can be sold out, repriced or removed at any time. Brand names and fitment on a listing are the seller's claims and have not been verified.