Illustrative render
Cutters and bits
6 mm Coated Metal Pointed Engraving Cutter for CNC Machining Centres, Tapered Tungsten Carbide Bit for Stainless Steel, Copper and Aluminium
$3.10¥20.69 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this 6mm coated pointed engraving cutter listing says
Lettering in stainless steel, copper and aluminium is the job named for this 6mm coated pointed cutter, a tapered tungsten carbide tool listed for CNC machining centres and sold under the seller's Jiaye name. A 6mm size usually points to a machining-centre holder rather than the 3.175 collets common on small engravers, but the title does not say whether 6mm is the shank or the body. Cone angle, tip width, coating type and overall length are also missing. The observed listing price is US$3.10 (CNY 20.69), presumably for one piece, and the Jiaye name is the seller's claim.
| Type | Coated pointed tapered cutter |
|---|---|
| Size | 6 mm (shank or body not stated) |
| Material | Tungsten carbide (tungsten steel), coated |
| Metals named | Stainless steel, copper, aluminium |
| Machines | CNC machining centres |
| Brand named | Jiaye (seller's claim) |
Questions for the seller before you buy a machine
- Is the 6mm the shank diameter or the body diameter, and what are the overall length, cutting length and shank tolerance for holding it in an ER collet?
- What cone angle and tip width or tip radius does the observed price cover, and which other angles can be chosen in the variant list?
- What coating is applied and is the carbide grade stated on a datasheet, so we can compare it with other coated pointed cutters?
- Which speeds and feeds do you suggest for stainless steel, and does the Jiaye name come with maker markings or packaging that you can photograph?
Who this machine or part suits
Suits a nameplate or metal-label shop running a machining centre that wants a pointed cutter for shallow lettering in aluminium, copper or stainless. It is the wrong choice for a small engraver whose spindle holds only 3.175 or 4 mm shanks, or for deep cuts, where a fine pointed tip tends to break.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $3.10 each | In yuan |
|---|---|---|
| 20 | $62.00 | ¥414 |
| 100 | $310 | ¥2,069 |
| 300 | $930 | ¥6,207 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other cutters and bits listings
Of 14 cutters and bits listings, this is the 11th cheapest at $3.10; the range is $0.92 to $7.81, median $2.56. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC router bits orders
Confirm shank diameter against your collet
A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.
Specify tip width and included angle
For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.
Questions about this CNC listing
Can I order single bits, or must I buy a whole box?
Often single pieces are available, because many Taobao sellers sell by the piece, but the seller sets the minimum per variant and some sell packs. Observed prices on this page run from US$0.92 to US$7.81 per listed variant. Ask us to confirm the pack size before buying, then increase counts after a test cut.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Can I order just one unit of the 6mm coated pointed engraving cutter?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar cutters and bits listings
-
4mm Tungsten Carbide Flat-Tip Tapered Engraving Bit, DLC Diamond-Like Coating, for Metal
$3.45Observed 27 October 2026, not a quote
View listing -
German-Imported 6A Colorful Tungsten Carbide Single-Flute End Mill 3.175, Acrylic, PVC
$2.89Observed 27 October 2026, not a quote
View listing -
3.175 4mm Tungsten Carbide Flat-Tip Engraving Bit for Metal, Stainless Steel, Copper, 5A
$2.77Observed 27 October 2026, not a quote
View listing
Want the 6mm coated pointed engraving cutter delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


