Skip to content

Spindles

ER11 48V 500W Brushed Air-Cooled Spindle Motor, External Carbon Brushes, Engraving, PCB

$35.12¥234 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this brushed 48V spindle motor ER11 listing says

The distinguishing detail in this listing is the brush design: it is a 48V 500W air-cooled ER11 spindle with external carbon brushes and a matte (frosted) housing finish, sold for engraving and PCB machines. External brushes generally let you swap worn brushes without opening the motor, but brushes still wear and add carbon dust. The title lacks no-load speed, rated current, body diameter and bearing details. It costs more than a similar 48V 500W ER11 listing that does not state the motor type. The observed listing price is US$35.12 (CNY 234.15).

Voltage48V
Power500W
Motor typeBrushed, external carbon brushes
CoolingAir-cooled
Collet seatER11

What we confirm with the machine seller first

  • How many hours of use do the external carbon brushes typically last at normal load, and are spare brushes included or sold separately?
  • What are the rated current, no-load speed and speed range, and which controller or PWM driver do you recommend for this motor?
  • What does the matte finish refer to, an anodised housing or a sandblasted surface, and is the body diameter standard for common clamps?
  • Is an ER11 nut and a collet set included, and what runout is measured at the collet face?

Who this machine or part suits

Reasonable for a PCB or light engraving rig where the owner is happy to service brushes, and for resellers wanting a lower-cost 48V option. It is the wrong choice for machines expected to run unattended for long shifts, where brush wear means regular maintenance.

Goods cost at the listed price

Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.

QuantityGoods at $35.12 eachIn yuan
5$176¥1,171
20$702¥4,683
50$1,756¥11,708

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other spindles listings

Of 14 spindles listings, this is the 3rd cheapest at $35.12; the range is $6.88 to $154, median $69.44. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.

Two checks that matter for CNC spindle motor orders

Confirm power, voltage and phase together

Titles pack several ratings into one listing, such as 800W up to 7.5KW, and each rating usually has its own voltage and price. Ask which rating the shown price belongs to and whether the motor is single-phase or three-phase. A mismatch with your inverter or supply is an easy mistake, so write the exact model into the order.

Ask about brushes, bearings and run-out

A brush-type spindle uses carbon brushes that wear and need replacing, and one listing says they are mounted externally. For any spindle, ask for the bearing type, a stated run-out figure, and whether spare brushes or bearings can ship with the order. Claims such as low temperature rise or 24-hour running are the seller's words, so ask for a test video.

All spindles checks and listings

Questions about this CNC listing

Should I buy an air-cooled spindle or a water-cooled one?

Choose air-cooled for simple installation with no pump or tank. Choose water-cooled for long runs, a quieter machine or higher power, and accept the plumbing and the risk of leaks. The listings here include both types, so decide on duty cycle and workshop conditions, then ask whether cooling parts are included.

Is this the price of the complete machine?

No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.

Can I order just one unit of the brushed 48V spindle motor ER11?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Buying the brushed 48V spindle motor ER11 for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.