Illustrative render
Cutters and bits
Longxiang Diamond Flat-Bottom Straight Stone Engraving Bit for Marble Milling and Cutting
$1.40¥9.33 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this diamond stone engraving bit listing says
A diamond-tipped flat-bottom straight bit is meant for stone routers: it mills a flat floor in marble and similar material and also cuts along a line. This listing names the Longxiang brand (the seller's claim) and uses wording that suggests a fused or sintered diamond layer, though the meaning is unclear. Diameter, shank size, cutting length and the diamond layer's grit or thickness are all absent. Stone bits typically run with water cooling to protect the bit and control dust. The observed US$1.40 (CNY 9.33) presumably covers one bit of one diameter.
| Type | Diamond flat-bottom straight bit |
|---|---|
| Applications | Marble and stone engraving, milling, cutting |
| Machine use | CNC engraving machines |
| Brand named | Longxiang (seller claim) |
What we confirm with the machine seller first
- What cutting diameter, shank diameter and cutting length does the observed price apply to, and which other sizes are available?
- How is the diamond attached to the bit, sintered, brazed or electroplated, and what grit size does it use?
- Is the bit meant to run dry, with a water mist or in a water bath, and what spindle speed range do you advise for marble?
- Can the same bit cut granite or only softer stone, and how many linear metres of marble has a sample typically cut?
What this listing is good for
Reasonable for a stone engraving shop or memorial-plaque maker with a water-supplied router, or a reseller of consumable stone tools. It is the wrong choice for a dry-running desktop engraver, where heat can ruin a diamond bit quickly.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $1.40 each | In yuan |
|---|---|---|
| 100 | $140 | ¥933 |
| 500 | $700 | ¥4,665 |
| 1,000 | $1,400 | ¥9,330 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other cutters and bits listings
This $1.40 listing ranks 3rd cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC router bits orders
Specify tip width and included angle
For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.
Clarify length and the '70 degree' label
Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.
Buying this item: common questions
Can I order single bits, or must I buy a whole box?
Often single pieces are available, because many Taobao sellers sell by the piece, but the seller sets the minimum per variant and some sell packs. Observed prices on this page run from US$0.92 to US$7.81 per listed variant. Ask us to confirm the pack size before buying, then increase counts after a test cut.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the diamond stone engraving bit?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar cutters and bits listings
-
70 Degree 4-Flute 12 Tungsten Carbide Long Flat End Mill for Dynamic Milling
$1.44Observed 27 October 2026, not a quote
View listing -
$1.06Observed 27 October 2026, not a quote
View listing -
3.175 Flat-Tip Tapered Engraving Bit for CNC Advertising Lettering and Relief Carving
$0.92Observed 27 October 2026, not a quote
View listing
Buying the diamond stone engraving bit for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


