Skip to content

Cutters and bits

3.175 mm Tungsten Carbide Single-Flute Spiral End Mill for Signage CNC, PVC and Acrylic Engraving Bit

$1.06¥7.07 observed on the listing, 27 October 2026. Not a quote.

Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.

What this 3.175 single flute spiral end mill listing says

Plain wording is the character of this listing: a 3.175 tungsten carbide single-flute spiral end mill for signage routers, PVC engraving and acrylic engraving machines, with no coating colour, grade tag or origin story attached. That sets it apart from the colour-coated, 6A-tagged single-flute mill we also list, which costs well over twice as much. The title still leaves out cutting diameter, flute length, overall length and spiral direction, and it does not say whether 3.175 refers to the shank. The observed listing price is US$1.06 (CNY 7.07), presumably for one piece.

TypeSingle-flute spiral end mill
MaterialTungsten carbide (tungsten steel)
Size3.175 (unit and meaning not stated)
ApplicationsSignage CNC, PVC and acrylic engraving

Questions for the seller before you buy a machine

  • What are the cutting diameter, flute length and overall length, and is 3.175 the shank diameter, the cutting diameter or both?
  • Is the spiral up-cut or down-cut, and is it meant for cutting right through acrylic or only for engraving a groove in the surface?
  • Is the observed price for a single bit, and which other cutting diameters or flute lengths on a 3.175 shank can be chosen in the variant list?
  • Is the flute polished or left uncoated, and which plastics have you actually cut with it, at what spindle speed?

What this listing is good for

Good for a sign shop or hobbyist who wants low-cost spare bits for plastic panels and is happy to run test cuts first. It is the wrong choice for cutting metal or hardwood, or for buyers who want a documented grade or coating, which the title does not give.

What the listed price adds up to

This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.

QuantityGoods at $1.06 eachIn yuan
100$106¥707
500$530¥3,535
1,000$1,060¥7,070

Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.

How this price compares with other cutters and bits listings

This $1.06 listing ranks 2nd cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.

Two checks that matter for CNC router bits orders

Confirm shank diameter against your collet

A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.

Clarify length and the '70 degree' label

Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.

All cutters and bits checks and listings

Buying this item: common questions

What is the difference between engraving bits and end mills?

Engraving bits usually have a fine tapered or pointed tip for lettering and relief carving, while end mills have a flat cutting end for clearing material and profiling. This page has both: tapered 3.175 and 4mm bits and a long 4-flute flat cutter. Check the geometry in the listing before assuming its use.

Can I buy this machine at the listed price?

Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.

Is there a minimum order for the 3.175 single flute spiral end mill?

Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.

Want the 3.175 single flute spiral end mill delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Is your workshop in Europe (EU) or United States? See the guides for wholesale desktop CNC machines for Europe (EU) and wholesale desktop CNC machines for United States. Taken from the Taobao listing on 27 October 2026; configurations change often. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.