Skip to content

Cutters and bits

70 Degree 4-Flute 12 Tungsten Carbide Long Flat End Mill for Dynamic Milling

$1.44¥9.62 observed on the listing, 27 October 2026. Not a quote.

We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.

What this 4 flute long flat end mill listing says

Four flutes, a flat bottom, tungsten carbide and an extended reach describe this end mill, which the seller recommends for dynamic milling on machining centers. The title opens with 70 degrees, which most likely refers to a hardness grade rather than an angle, and then a bare 12, probably a diameter in millimetres. Neither unit is stated. Overall length, cutting length, shank diameter and coating are missing. The observed US$1.44 (CNY 9.62) is low for a 12 mm carbide mill, so ask which size it truly covers.

TypeFlat-bottom end mill, extended length
Flutes4
MaterialTungsten carbide (tungsten steel)
Size tag12 (unit not stated)
Hardness tag70 degrees (unit not stated)

What we confirm with the machine seller first

  • Does 70 degrees mean HRC 70 hardness, and does the 12 refer to a 12 mm cutting diameter? Please state diameter, shank and flute length.
  • Which diameters are in the variant list, and which one is the observed price for?
  • Which materials is this four-flute mill meant for, such as aluminium, steel or hardened steel, and is there a coating?
  • What is the overall length, how much neck relief does the long version have, and to what tolerance is the shank ground?

Who this machine or part suits

Practical for a small shop restocking flat finishing end mills for aluminium or mild steel, or a reseller supplying CNC users. It is the wrong choice for deep slotting in hard steel without a stated coating and hardness, or for engraving, where a flat mill is the wrong tool.

Goods cost at the listed price

Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.

QuantityGoods at $1.44 eachIn yuan
100$144¥962
500$720¥4,810
1,000$1,440¥9,620

Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.

How this price compares with other cutters and bits listings

Of 14 cutters and bits listings, this is the 4th cheapest at $1.44; the range is $0.92 to $7.81, median $2.56. Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.

Two checks that matter for CNC router bits orders

Treat grade labels and brand names as claims

Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.

Clarify length and the '70 degree' label

Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.

All cutters and bits checks and listings

Questions about this CNC listing

Do I need to inspect CNC router bits when they arrive?

Yes, a quick check is sensible, because small tips can chip in transit and a seller can ship a different variant. We receive the goods at our warehouse in China and can check tip condition, markings and counts against your order before shipping. Tell us in advance which dimensions to measure, such as shank diameter and angle.

Is this the price of the complete machine?

No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.

Can I order just one unit of the 4 flute long flat end mill?

For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.

Buying the 4 flute long flat end mill for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.

Price this landed

Wholesale desktop CNC machines from China covers how small orders work. Delivering the machine to Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.