Illustrative render
Cutters and bits
3.175 Flat-Tip Tapered Engraving Bit for CNC Advertising Lettering and Relief Carving
$0.92¥6.11 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this flat tip tapered engraving bit listing says
A flat-tip tapered engraving bit has a conical body ending in a small flat, which usually keeps line width consistent when engraving lettering or carving relief; this listing is for a 3.175 shank size, which is usually 1/8 inch. The title says it is for advertising lettering and relief carving, but it gives no cone angle, tip width, flute count or material. Those values decide the line weight and the depth. The observed price is US$0.92 (CNY 6.11), probably for a single bit of one variant.
| Type | Flat-tip tapered engraving bit |
|---|---|
| Size | 3.175 (unit not stated, usually mm shank) |
| Applications | CNC advertising lettering, relief carving |
Questions for the seller before you buy a machine
- What cone angle and tip width does the observed price apply to, and which angle and tip options are listed in the variants?
- What material is the bit made from, and is it carbide or high-speed steel, with any coating?
- Is the 3.175 shank diameter in millimetres, and what are the overall length and cutting length of the bit?
- How many pieces come in one unit, and is the shank ground to a tolerance that suits a 3.175 collet?
Who this machine or part suits
Handy for a sign shop or hobbyist who engraves lettering in wood, acrylic or plastic and wants a very low-cost consumable bit to test. It is the wrong choice for hard metal work, since the listing does not state the material or coating.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $0.92 each | In yuan |
|---|---|---|
| 100 | $92.00 | ¥611 |
| 500 | $460 | ¥3,055 |
| 1,000 | $920 | ¥6,110 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other cutters and bits listings
Of 14 cutters and bits listings, this is the 1st cheapest at $0.92; the range is $0.92 to $7.81, median $2.56. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC router bits orders
Confirm shank diameter against your collet
A bit only works if its shank matches the collet bore. These listings mention 3.175 mm, which is 1/8 inch, and 4 mm. Those figures are normally shank diameters, but ask the seller to confirm, because the two sizes cannot share one collet. Write the shank size into the order, and ask whether a listing offers several sizes under a single price.
Specify tip width and included angle
For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.
Questions about this CNC listing
Which CNC router bits suit engraving lettering into metal?
Carbide flat-tip tapered bits are the usual choice for metal lettering, and several listings here describe them for that use, some with DLC or titanium-type coatings in 3.175 or 4mm sizes. Whether they suit your alloy depends on spindle rigidity and feeds, so run a scrap test first and ask the seller which metals were tested.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Can I order just one unit of the flat tip tapered engraving bit?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar cutters and bits listings
-
$1.06Observed 27 October 2026, not a quote
View listing -
3.175 Flat-Tip Tapered Engraving Bit for CNC Engraving Machines and Relief Carving
$7.81Observed 27 October 2026, not a quote
View listing -
Longxiang Diamond Flat-Bottom Straight Stone Engraving Bit for Marble Milling and Cutting
$1.40Observed 27 October 2026, not a quote
View listing
Want the flat tip tapered engraving bit delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in Canada or Europe (EU)? See the guides for wholesale desktop CNC machines for Canada and wholesale desktop CNC machines for Europe (EU). Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


