Illustrative render
Cutters and bits
3.175 Flat-Tip Tapered Engraving Bit for CNC Engraving Machines and Relief Carving
$7.81¥52.11 observed on the listing, 27 October 2026. Not a quote.
Before ordering we check the machine revision, the electrical spec and the packing with the seller. One-off purchases are welcome.
What this 3.175 flat tip tapered bit listing says
At US$7.81 (CNY 52.11), this plain 3.175 flat-tip tapered bit is more than eight times the observed price of a near-identical listing for the same job, and nothing in the title explains why. The Chinese wording matches that cheaper listing almost word for word: flat tip, CNC engraving machine, relief carving, tapered knife. The title states no material, cone angle, tip width, coating or brand. The price gap could reflect carbide against steel, a ground tip or a larger pack, so find out which before paying more.
| Type | Flat-tip tapered engraving bit |
|---|---|
| Size | 3.175 (unit not stated) |
| Use | CNC engraving machines, relief carving |
What we confirm with the machine seller first
- What material is this bit made from, and what makes it cost more than a standard 3.175 flat-tip tapered bit with the same description?
- Which cone angle and tip width apply to the observed price, and is one bit supplied or a pack?
- Do you have a datasheet or cutting test showing the life of this bit compared with a cheaper bit of the same angle?
- What are the shank tolerance and runout of the bit, and is it supplied with a protective cap or tube?
What this listing is good for
A fit for a buyer who has a particular reason to test a pricier flat-tip bit for relief carving and can get its material and pack size confirmed. It is the wrong choice for general lettering stock, where much cheaper bits with the same stated features exist.
Goods cost at the listed price
Goods only, at the observed unit price for the configuration listed. Sellers may change price by spindle, controller or table size, so the figures are arithmetic, not a quote.
| Quantity | Goods at $7.81 each | In yuan |
|---|---|---|
| 20 | $156 | ¥1,042 |
| 100 | $781 | ¥5,211 |
| 300 | $2,343 | ¥15,633 |
Add the crate, inland delivery, our fee, freight and duty on top. Heavy, bulky machines make freight a bigger share than it is for small parts.
How this price compares with other cutters and bits listings
This $7.81 listing ranks 14th cheapest among 14 comparable ones, which run $0.92 to $7.81 (median $2.56). Price gaps between machine listings usually reflect frame, spindle, drive or controller differences, so compare the same configuration.
Two checks that matter for CNC router bits orders
Treat grade labels and brand names as claims
Labels such as 5A, 6A, imported or a named brand are the seller's descriptions, not checked specifications. Ask for the carbide grade or hardness, the coating type and the country of manufacture, then test one piece on your material. Compare edge wear after a standard cut before ordering a larger count.
Clarify length and the '70 degree' label
Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.
Buying this item: common questions
What is the difference between engraving bits and end mills?
Engraving bits usually have a fine tapered or pointed tip for lettering and relief carving, while end mills have a flat cutting end for clearing material and profiling. This page has both: tapered 3.175 and 4mm bits and a long 4-flute flat cutter. Check the geometry in the listing before assuming its use.
Is this the price of the complete machine?
No. It is what the listing showed on 27 October 2026, converted at ¥6.668 to the dollar, and listings often price a base configuration. Spindle, controller, accessories, crating, our fee, freight and import duty are confirmed and quoted separately.
Is there a minimum order for the 3.175 flat tip tapered bit?
Single machines are commonly sold one at a time; accessories and wear parts can carry a per-variant minimum. We check the configuration and minimum with the seller first.
Similar cutters and bits listings
-
3.175 Flat-Tip Tapered Engraving Bit for CNC Advertising Lettering and Relief Carving
$0.92Observed 27 October 2026, not a quote
View listing -
Huhao Titanium-Coated 4mm Flat-Tip Tapered Engraving Bit for CNC Metal Lettering
$3.51Observed 27 October 2026, not a quote
View listing -
4mm Tungsten Carbide Flat-Tip Tapered Engraving Bit, DLC Diamond-Like Coating, for Metal
$3.45Observed 27 October 2026, not a quote
View listing
Buying the 3.175 flat tip tapered bit for your workshop or a customer? Send the quantity, your voltage and the destination and we return an itemised delivered price.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Delivering the machine to United States or United Kingdom? See the guides for wholesale desktop CNC machines for United States and wholesale desktop CNC machines for United Kingdom. Figures and images are from the seller's Taobao listing as recorded on 27 October 2026. Listings may be repriced or removed without notice; travel, power and accuracy figures are the seller's and have not been verified.


