Illustrative render
Cutters and bits
Huhao Titanium-Coated 4mm Flat-Tip Tapered Engraving Bit for CNC Metal Lettering
$3.51¥23.39 observed on the listing, 27 October 2026. Not a quote.
We confirm the exact configuration, voltage and what is included with the seller before ordering. Single units and trial orders are fine.
What this titanium coated engraving bit listing says
Titanium coating is the point of difference for this 4mm flat-tip tapered engraving bit, which the seller, using the Huhao name, offers for CNC metal lettering. Titanium-based coatings are usually added to reduce wear and give the bit a gold or dark finish, but the title does not say which coating or how thick. It is priced close to a DLC-coated 4mm bit from another listing, so ask both sellers what the coating adds. Cone angle, tip width and shank diameter are not stated. The observed price is US$3.51 (CNY 23.39).
| Type | Flat-tip tapered engraving bit |
|---|---|
| Coating | Titanium (seller wording) |
| Size | 4mm (shank or body not specified) |
| Use | CNC metal lettering |
| Brand named | Huhao (seller claim) |
Questions for the seller before you buy a machine
- What is the coating: titanium nitride, titanium aluminum nitride or another layer, and what is the base material under it?
- What cone angle and tip width apply to the observed price, and which other variants can be selected?
- Does the 4mm refer to the shank, and what are the overall length of the bit and its cutting length?
- Which metals have you engraved with this bit, and how many nameplates or metres of line has it typically lasted?
Who this machine or part suits
Works for a metal tag or nameplate shop that wants to compare coated flat-tip bits in the same size using a small test batch. It is the wrong choice if your spindle collet is 3.175 mm, or if you cut wood and plastics, where a coating gives little.
What the listed price adds up to
This multiplies the listed price for the listed configuration. Options such as spindle power, controller or rails change the price and are confirmed first.
| Quantity | Goods at $3.51 each | In yuan |
|---|---|---|
| 20 | $70.20 | ¥468 |
| 100 | $351 | ¥2,339 |
| 300 | $1,053 | ¥7,017 |
Crating, seller delivery to the warehouse, our fee, international freight and import duty are added; for a machine, crating and freight can be a large part of the delivered cost.
How this price compares with other cutters and bits listings
Of 14 cutters and bits listings, this is the 13th cheapest at $3.51; the range is $0.92 to $7.81, median $2.56. Before comparing machine prices, check that the travel, spindle and controller in each listing actually match.
Two checks that matter for CNC router bits orders
Specify tip width and included angle
For a tapered engraving bit, the tip width and the included angle decide line width, detail and depth. A title such as 10 to 90 degree lists a range under one price. Ask the seller to confirm the exact tip width and angle for the variant you choose, and record both in the order so every piece in a batch matches.
Clarify length and the '70 degree' label
Overall length, cutting length and neck clearance decide how deep a bit can cut before the shank touches the work. The long flat end mill carries a 70 degree label that is unclear on its own, so ask whether it describes hardness, a helix or an angle. Request cutting length and total length for each variant.
Questions about this CNC listing
Which CNC router bits suit engraving lettering into metal?
Carbide flat-tip tapered bits are the usual choice for metal lettering, and several listings here describe them for that use, some with DLC or titanium-type coatings in 3.175 or 4mm sizes. Whether they suit your alloy depends on spindle rigidity and feeds, so run a scrap test first and ask the seller which metals were tested.
Can I buy this machine at the listed price?
Not as listed. The figure is the seller's price on 27 October 2026 at ¥6.668 to the dollar for the configuration in the listing. We confirm what is in the box, the voltage and the crate, then quote the delivered cost.
Can I order just one unit of the titanium coated engraving bit?
For machines, usually yes: many sellers ship single units. For tooling and spare parts the seller may set a minimum per variant, which we confirm before ordering.
Similar cutters and bits listings
-
3.175 Flat-Tip Tapered Engraving Bit for CNC Engraving Machines and Relief Carving
$7.81Observed 27 October 2026, not a quote
View listing -
4mm Tungsten Carbide Flat-Tip Tapered Engraving Bit, DLC Diamond-Like Coating, for Metal
$3.45Observed 27 October 2026, not a quote
View listing -
$3.10Observed 27 October 2026, not a quote
View listing
Want the titanium coated engraving bit delivered? Tell us the configuration, quantity and destination and we quote it line by line, crate and freight included.
Price this landedWholesale desktop CNC machines from China covers how small orders work. Is your workshop in Australia or Canada? See the guides for wholesale desktop CNC machines for Australia and wholesale desktop CNC machines for Canada. Taken from the Taobao listing on 27 October 2026; configurations change often. A machine listing can change configuration, price or availability at any time, and specifications on it are the seller's claims until we confirm them.


